Standard Size in 1.25 x 0.8 x 0.44 inches Nickel-Coated Copper with Non-Conductive Base, Six-side shielded Operating Temperature: -25~60 degrees 2:1 Input Range High Efficiency and Reliability Regulated Output Low Ripple and Noise
download SPC.
Specification
1.All specificationsvalid at nominal input voltage,full load and +25°Cafter warm-up time unless otherwise stated. 2.Measured with 0.1U 50V // 47U 50V Ceramic Cap. Cross to output
Input Specification
Characteristics
Conditions
Voltage Range
2:1 Range:
9 ~ 18 VDC 18 ~ 36 VDC 36 ~ 75 VDC
Filter
type
Output Specification
Characteristics
Conditions
Output Power
10 Watt （max.）
Voltage Accuracy （Full Load and Nominal Vin）
Single:
±2%
Dual:
±2%
Minimum Load （at Full Load）
Line Regulation （LL to HL at Full Load）
Single:
±0.5%
（typ.）
Dual:
±0.5%
Load Regulation （1 to at Full Load）
Single:
3.3S:±3% others:±1%
（typ.）
Dual:
±1%
Ripple （20MHz bandwidth）
3.3S:50mV （Vp-p） 5S~24S:1% Vout
（max.）
Dual:<0.2% Vout+20mV
Noise （20MHz bandwidth）
3.3S:50mV （Vp-p） 5S~24S:1% Vout
（max.）
Dual:<0.5% Vout+50mV
Temperature Coefficient
±0.02% / °C （max.）
Short Circuit Protection
Current limit, Auto-recovery
General Specification
Characteristics
Conditions
Switching Frequency
300K Hz （typ.）
Isolation Voltage （Input to Output）
1600 VDC （min.）
Operating Temperature
-25 ℃ to +60 ℃ （with derating）
Storage Temperature
-55°C to +105°C
Humidity
95% RH （max.）
Cooling
Free air convection
Physical Specification
Characteristics
Conditions
Dimension （Tolerance ±0.5）
31.8 x 20.3 x 11.2 mm
1.25 x 0.8 x 0.44 inches
Weight
20 g
Case Material
Nickel-Coated Copper with Non-Conductive Base, Six-side shielded
發郵件給我們：sales1@haonpower.com
type